ALASKA-WIDE TRANSFORMER BUYERS / BUYING, NOT SELLINGQUESTIONS? (614) 715-3047   /   saleselectricalbuyers@gmail.com
ALASKA
TRANSFORMER BUYERSWE BUY TRANSFORMERS
Illustrative photograph of electrical transformer equipment
WE BUY USED & SURPLUS TRANSFORMERS

Sell 1000 kVA 13.8 kV Transformers in Alaska

Selling a used or surplus electrical transformer in Alaska? Tell us what you have. We offer upfront payment and cover freight on purchases.

01Payments Upfront
02No Testing
03We Cover All Freight
04All Voltage Classes Bought
ALASKA TRANSFORMER BUYERS / kVA ratings

A 1000 kVA, 13.8 kV rating is only the starting point

If you have a used, surplus, or decommissioned 1000 kVA transformer marked 13.8 kV in Alaska, we buy transformers and do not sell them. We consider all voltage classes, but each asset and its logistics must be reviewed; a rating alone does not establish that a unit qualifies for purchase. We make cash offers for equipment we agree to buy, pay upfront under the agreed purchase, and cover freight for that purchase.

A 1000 kVA nameplate rating equals 1 MVA of apparent power. It is not a measure of physical weight or an automatic statement of kilowatt output. Tell us whether 1000 kVA is the base rating, a fan-assisted rating, or a combined rating for a bank. If the equipment is a bank, identify each transformer by its own rating and serial number rather than assuming all units match. Also say whether the equipment is available now or will be released after a planned project.

Identify both windings from the nameplate

Share the exact nameplate information available, especially the primary and secondary voltages, phase, kVA, frequency, cooling designation, tap range, and connection details. A 13.8 kV marking by itself does not identify both sides of the transformer. State which winding carries that marking and reproduce the plate value as written, including any slash, range, or connection notation. Depending on the unit, the figure may refer to a higher-voltage winding, a tap, or a system class, so avoid filling gaps by assumption.

If it is safe to do so, provide photographs of the exterior and nameplate without approaching energized parts or opening a cabinet. A wider view can show whether the unit is indoors, on a pad, elevated, or in storage. If the plate is missing or unreadable, say so and share existing drawings or asset records instead. No seller testing is required to request a review; provide what is already known and identify anything that remains unknown.

Describe condition, configuration, and included equipment

The equipment review considers more than manufacturer and capacity. Useful context includes age if known, cooling arrangement, operating or storage history, accessories, and the number of units. Tell us whether the transformer was operating before removal, held as a spare, or has an unknown history. Where safely observable, disclose corrosion, impact damage, missing bushings, an open enclosure, or signs of leakage. Existing service records may help if the transformer was repaired, but undocumented work should not be presented as verified.

Separate the transformer from connected switchgear, spare parts, and other equipment in the inventory so the proposed purchase scope is clear. For a 1000 kVA unit, confirm whether the rating belongs to one transformer or to an assembly, and identify any cooling-dependent rating separately from the base rating. Provide the shipping weight if documented, and say whether radiators, cabinets, or other accessories are included. At this capacity, the lift plan may require more than an ordinary warehouse forklift; actual weight and site conditions matter.

Share the information needed for an offer

A request can begin with the available nameplate details, photographs, equipment location, and a contact who can answer access questions. For multiple transformers, provide one entry per serial number and say whether the units can be collected together. If details are missing, state what is unknown rather than guessing. We may ask for clarification about condition, ownership, timing, or freight access before deciding whether the equipment and logistics are suitable.

If we agree to buy the identified equipment, we provide a cash offer. There is no requirement for the seller to test the transformer before requesting a review. A purchase is not assumed until the asset and logistics have been assessed and both parties agree on terms. Before proceeding, confirm the included assets, payment method and timing, and pickup arrangements. The person accepting the offer should have authority to sell the equipment and arrange its release.

Plan access and freight around the actual site

For Alaska pickup planning, give the equipment’s actual location, not only the nearest town. Explain whether a truck can reach it, describe the surface, and provide known gate or doorway dimensions, overhead obstructions, appointment requirements, and security rules. Share measured length, width, and height along with documented weight where available. Identify loose radiators or other accessories separately, and note bushings or connection assemblies that extend beyond the main enclosure. The transport envelope and lifting arrangement depend on measured dimensions, actual load, and site conditions—not on the 13.8 kV marking alone.

The freight route depends on the site and service availability. Some shipments may involve local trucking, a staging area, a terminal, or another freight connection; weather, seasonal conditions, lift capacity, and handling needs can affect scheduling. We cover freight for an agreed purchase, with pickup coordinated for the particular unit and location. If the site remains active, coordinate the release date with the facility team so pickup does not interfere with operations.

Disclose fluid and safety information; confirm a clear handoff

Do not energize, disconnect, lift, open, drain, or sample a transformer to obtain an offer. Electrical isolation, verification, and removal must be handled by appropriately qualified personnel under site procedures and applicable rules. Disclose the insulating liquid and its type if known, any visible leakage, and existing records about polychlorinated biphenyls (PCBs). Report unknown fluid or PCB status as unknown; it is not an assurance of acceptance. Fluid management, environmental requirements, packaging, and transport depend on assessment of the equipment and applicable requirements. Existing documents are useful, but seller testing is not required to request a review.

Before pickup, confirm who will provide access, where the driver should report, and whether the transformer and agreed parts are in the expected location. Promptly report changes in condition, access, or readiness. If the unit is still connected, elevated, leaking, or behind a restricted area, disclose that status rather than treating it as ready to load. A clear asset list and current photographs help confirm that the equipment released is the equipment agreed for purchase.

LET'S TALK ABOUT YOUR EQUIPMENT

Send the nameplate.
We'll take it from there.

Tell us what you have and where it is. We buy used, surplus, and decommissioned electrical transformers across Alaska. No seller testing required.

CALL   (614) 715-3047TEXT NAMEPLATE PHOTOS   ↗saleselectricalbuyers@gmail.com

Have multiple units? Include what you know. We can review your list and discuss the details with you.

Photos and contact details are submitted through FormSubmit. Maximum combined attachment size: 10 MB. You can also text photos directly to (614) 715-3047.

Request a Quote