A 13.2 kV marking is a starting point, not the full specification
If you are retiring or releasing a used, surplus, or decommissioned 13.2 kV transformer in Alaska, the first useful step is to describe the actual unit. A 13.2 kV marking by itself does not identify both windings or establish the full connection. Share the primary and secondary voltages, phase, kVA, and tap information, and indicate which winding carries the 13.2 kV marking. Copy the plate values exactly, including slashes, ranges, and connection details; the figure may refer to a higher-voltage winding, a tap, or a system class.
We buy transformers; we do not sell them. All voltage classes are considered, but consideration is not a promise that a particular transformer will be purchased. Any offer depends on review of the equipment and the practical logistics for its location.
Build the asset record from information already available
Where it is safe to do so, provide a photograph of the transformer’s exterior and nameplate. The plate may identify the manufacturer, model, serial number, kVA, primary and secondary voltage, phase, frequency, and cooling designation. Existing drawings or asset records can help if the plate is missing or unreadable. A photograph showing the unit’s setting—such as indoors, on a pad, elevated, or in storage—can also help explain the site context. Do not open a cabinet or approach energized parts to improve a photograph.
For multiple units, list each transformer separately by serial number when available. Identify whether it is available now or will be released after a planned project, and distinguish the transformer from connected switchgear, spare parts, or other equipment. State what is included rather than assuming accessories belong in the same transaction.
Condition and history shape the review
A review considers more than manufacturer or rated capacity. Useful details include age if known, cooling arrangement, complete winding information, accessories, quantity, and physical condition. Say whether the transformer was operating before removal, was kept as a spare, or has an unknown history. Where visible and safe to observe, disclose corrosion, impact damage, missing bushings, an open enclosure, or signs of leakage. If repairs were made, share existing service records when available; do not present an undocumented repair as verified.
You do not need to arrange seller testing to request a review. Share information already on hand and identify gaps plainly instead of guessing. Existing records and photographs may help clarify the asset, while condition and any later handling remain subject to assessment.
Disclose fluid and other safety-related information
Do not energize, disconnect, lift, open, drain, or sample a transformer to obtain an offer. Electrical isolation, verification, and removal work must be handled by appropriately qualified personnel under site procedures and applicable rules. If known, report the type and presence of insulating liquid, visible leakage, and any existing records concerning polychlorinated biphenyls (PCBs). If fluid or PCB status is unknown, say that it is unknown; do not assume it is safe or that it will automatically be accepted.
Fluid management, environmental requirements, packaging, and transport depend on the particular equipment, assessment, and applicable requirements. Existing documentation is useful, but testing by the seller is not required to ask for a review.
Alaska logistics depend on the actual site
For an Alaska transformer purchase, the equipment’s location and access matter—not just the nearest town. Describe whether a truck can reach the unit, surface conditions, gate and doorway dimensions, overhead obstructions, and any appointment or security rules. Provide measured length, width, height, and weight if known, and list loose radiators or other accessories separately. For a 13.2 kV unit, note bushings or connection assemblies that extend beyond the enclosure; transport dimensions should reflect measurements and the agreed handling plan, not the voltage marking alone.
The practical route may involve local trucking, a staging area, a terminal, or another freight connection, depending on the site and service availability. Weather, seasonal conditions, lift capacity, and handling needs can affect scheduling. We cover freight for equipment we agree to buy, with pickup arrangements coordinated for the specific unit and site; a route or pickup plan is not guaranteed before review.
Request an offer and confirm the handoff
To begin, share available nameplate details, photographs, the equipment location, and a contact who can answer access questions. For several transformers, provide one entry per serial number and say whether the units can be collected together. We may ask for clarification about condition, ownership, timing, or the freight route. If the equipment and logistics are suitable, we provide a cash offer for the identified assets. Cash offers are for equipment we agree to buy, and payment is upfront under the agreed purchase terms.
Before proceeding, confirm the amount, payment method, timing, included assets, and pickup arrangements; the person accepting the offer should have authority to sell the equipment and arrange its release. Coordinate any release from an active site with the facility team. Before pickup, confirm who will provide access, where the driver should report, and whether the equipment is in the agreed location. Promptly disclose changes in condition, access, or readiness—including if the unit remains connected, elevated, leaking, or in a restricted area—so the handling plan can be reassessed.
