A 7.2 kV marking is only part of the identification
If you are retiring or releasing a used, surplus, or decommissioned transformer marked 7.2 kV in Alaska, we buy transformers; we do not sell them. The marking is useful, but it does not describe the complete unit or establish whether it is suitable for purchase. It may refer to a winding, a tap, or a system class, so the other nameplate details matter. We consider all voltage classes, including equipment removed from service and units held as spares, with each asset subject to equipment and logistics review.
Share the exact plate values as written, including primary and secondary voltages, phase, kVA, connection information, frequency, cooling designation, and tap range if shown. Identify which winding carries the 7.2 kV marking. Include manufacturer, model, and serial number when available. If the nameplate is missing or unreadable, say so and provide any existing drawings or asset records rather than filling gaps with guesses.
Build the description from existing information
Photographs can help establish what is being considered: a clear view of the transformer exterior, the nameplate, and the surrounding area may show whether the unit is indoors, on a pad, elevated, or in storage. Take or share images only from a position that does not expose anyone to electrical hazards. Do not open a cabinet or approach energized parts to improve a photograph. Seller testing is not required to request a review, and existing information may be shared without commissioning new testing.
Describe the known history and observable condition, including whether the unit was operating before removal, stored as a spare, or has an unknown history. Note age if known, visible corrosion or impact damage, missing bushings, an open enclosure, or signs of leakage when these can be observed safely. If repairs are documented, provide the existing service records; do not present an undocumented repair as verified. A separate inventory for transformers, connected switchgear, spare parts, and other equipment helps clarify what is included.
Condition, fluid, and records are part of the review
A review may consider physical condition, cooling arrangement, complete winding information, accessories, unit count, and available history—not just the manufacturer or capacity. Disclose the presence and type of insulating liquid if known, any visible leakage, and existing records concerning polychlorinated biphenyls (PCBs). If fluid or PCB status is unknown, report it as unknown; do not assume the equipment is safe or automatically acceptable. Fluid management, environmental requirements, packaging, and transport depend on assessment of the particular transformer and applicable requirements.
Do not energize, disconnect, lift, open, drain, or sample a transformer to obtain an offer. Electrical isolation, verification, and removal must be handled by appropriately qualified personnel under site procedures and applicable rules. Hazardous conditions remain subject to assessment. Existing documentation is useful, but the seller does not need to perform testing as a condition of asking us to review the equipment.
Request an offer for identified assets
Send the available nameplate details, photographs, actual equipment location, and a contact who can answer access questions. For multiple units, provide one entry per serial number when possible and say whether they could be collected together. Note whether each transformer is available now or will become available after a planned project. If information is missing, identify what is unknown. We may ask for clarification about condition, ownership, timing, or the freight route before deciding whether the equipment and logistics are suitable.
If we agree to buy the identified equipment and an offer is made and accepted, we provide a cash offer and pay upfront. The buyer covers freight for an agreed purchase. Confirm the amount, payment method, timing, included assets, and pickup arrangements before proceeding. The person accepting the offer should be authorized to sell the equipment and arrange its release. No purchase or particular price is assured before review and agreement on terms.
Plan access around the actual Alaska site
Pickup planning depends on where the transformer is located and how it can be reached, not simply on the nearest town. Describe truck access, surface conditions, gate and doorway dimensions, overhead obstructions, and any appointment or security rules. Provide measured length, width, height, and weight if known; identify loose radiators and other accessories separately. For a unit marked 7.2 kV, note bushings or connection assemblies that extend beyond the main enclosure. Transport dimensions and handling need to be based on measurement and the agreed plan, not voltage alone.
Some shipments may involve local trucking, a staging area, a terminal, or another freight connection; the practical route depends on the site and service availability. Weather, seasonal conditions, lift capacity, and required handling can affect scheduling. If the transformer is still connected, elevated, leaking, or behind a restricted area, disclose that status instead of assuming it is ready to load. If the site remains active, coordinate the release date with the facility team so pickup can be planned around operations.
Make the handoff clear
Before an agreed pickup, confirm who can provide access, where the driver should report, and whether the transformer and included parts are in the agreed location. Share changes in condition, access, or readiness promptly so the handling plan can be reassessed. A clear asset list and photographs can help match the equipment reviewed with the equipment released. These details give both parties a practical basis for evaluating a 7.2 kV transformer purchase in Alaska, while leaving suitability, handling, and logistics subject to review.
